|
R. P. C. Component Pricing |
|
17-Jan-07 |
|
JUNIOR DRAGSTERS |
|
|
RPC "Rustler" |
$4,795.00 |
|
RPC "Diablo" |
$4,995.00 |
|
RPC "Bullet" |
$5,495.00 |
|
RPC "Gunslinger ET" |
$5,995.00 |
|
RPC "Gunslinger" |
$6,295.00 |
|
RPC "Desperado" Turnkey Junior Comp |
Call for Pricing |
|
|
|
|
|
CHASSIS COMPONENTS |
|
|
Steel Spindles |
$119.95 |
|
A.R.C. Rack and Pinion Unit |
$89.95 |
|
Aluminum Tie Rod - 2 3/8" |
$6.50 |
|
Adjustable Rod End - RH |
$6.50 |
|
Adjustable Rod End - LH |
$6.50 |
|
72" Steering Shaft (Chromoly) |
$30.00 |
|
Full Size Butterfly Steering Wheel w/grips |
$75.00 |
|
SFI-Certified Quick Disconnect |
$75.00 |
|
Steering Wheel - "Rustler" |
$50.00 |
|
Disconnect - "Rustler" |
$50.00 |
|
RPC Fiberglass Seat - Semi-Laydown |
$119.95 |
|
RPC Fiberglass Seat - Laydown |
$119.95 |
|
RPC Fiberglass Body with nosepiece "Small Body"
(untrimmed) |
$585.00 |
|
RPC Fiberglass Body with nosepiece "Big Body"
(untrimmed) |
$585.00 |
|
RPC Top Fuel Style Windshield (standard or 1" taller) |
$40.00 |
|
RPC Full View Side Windows |
$30.00 |
|
RPC Triple-Clamp Motorplate and Jackshaft Assembly |
$199.95 |
|
3/4" X 12" Jackshaft |
$15.00 |
|
3/4" Locking Collar |
$5.00 |
|
Jackshaft Bearing 3/4" |
$7.00 |
|
RPC Double Bearing Crankshaft Support Assembly (incls.
Starter nut) |
$139.95 |
|
RPC Aluminum Fuel Tank |
$99.95 |
|
JAZ 1 qt. Fuel Tank |
$39.95 |
|
RPC Chain Guard |
$15.00 |
|
RPC Weight Tank (incls. Powdercoat) |
$90.00 |
|
RPC Engine Breather / Oil Overflow Tank (incls.
Powdercoat) |
$100.00 |
|
#415 Regina Gold Chain (per foot) |
$7.00 |
|
#35 Regina Gold Chain (per foot) |
$9.00 |
|
#415 Front Sprocket (9 thru 15 tooth) |
$27.50 |
|
#415 Rear Sprocket (64 thru 71 tooth) |
$52.95 |
|
RPC 18" Splined Axle with Hub (splined at sprocket hub
only) |
$175.00 |
|
RPC 17" Full Splined Axle (Solid) |
$120.00 |
|
RPC 17" Full Splined Axle (Gun-Drilled) |
$157.50 |
|
RPC Billet Aluminum Bearing Cassette - 1 1/4" |
$15.00 |
|
RPC Ultra Free-Spin Wheel Bearing - 1 1/4" |
$11.50 |
|
RPC Ceramic Coated Rear Wheel Bearing - 1 1/4" |
$45.00 |
|
RPC Ceramic Coated Front Wheel Bearing (1 pair) |
$53.00 |
|
RPC SUPER LUBE for Ceramic Wheel Bearings |
$11.00 |
|
Keyed 3-spoke Wheel Hub - 1 1/4" |
$41.95 |
|
Splined 3-spoke Wheel Hub - 1 1/4" |
$55.95 |
|
Keyed Minilite Brake Hub - 1 1/4" |
$15.00 |
|
Splined Minilite Brake Hub - 1 1/4" |
$30.00 |
|
Splined Sprocket Hub - 1 1/4" (for full spline axle) |
$42.00 |
|
Keyed Sprocket Hub - 1 1/4" |
$35.00 |
|
6" X 3/16" Brake Rotor |
$24.00 |
|
Brake Pad for Minilite Caliper |
$9.75 |
|
MCP Billet Caliper |
$104.50 |
|
MCP Billet Master Cylinder |
$64.50 |
|
"Quick Reaction" Throttle Pedal Assembly |
$78.95 |
|
"Quick Reaction" Brake Pedal Assembly |
$67.50 |
|
"Rustler" Throttle Pedal (minus cable) |
$38.50 |
|
"Rustler" Brake Pedal |
$31.50 |
|
92" Throttle Cable with Housing |
$7.95 |
|
"108" X #3 AN Braided Stainless Steel Brake Line |
$39.95 |
|
1/8" X #3 Straight Fitting |
$5.00 |
|
1/8" X #3 90° Fitting |
$7.50 |
|
8" X 6, 7, 8" Wide Rear Wheel |
$56.00 |
|
8" X 9" Rear Wheel |
$60.00 |
|
Mickey Thompson 18 X 8 X 8 Slicks |
$130.00 |
|
Hoosier 18 X 8 X 8 Slicks |
$100.00 |
|
Hoosier 18 X 8 X 10 Slicks |
$110.00 |
|
RPC 16" Billet Aluminum Front Wheels (12 Patterns) PER
PAIR |
$366.00 |
|
16 X 1 3/4" 100 psi tire (each) |
$12.00 |
|
16 X 1 3/4" tube (each) |
$6.00 |
|
RPC CADPRO Heat Shrink Encapsulated Wiring Harness |
$37.50 |
|
|
|
|
|
SAFETY EQUIPMENT |
|
|
G-FORCE Latch & Link 5 point Harness System |
$75.00 |
|
G-FORCE Camlock 5 point Harness System |
$130.00 |
|
Master Blaster Roll Bar Pad |
$35.00 |
|
|
|
|
|
CLUTCH COMPONENTS |
|
|
RPC-prepped Overdrive Clutch Assembly (incls. Primary,
Secondary, & Belt) |
CALL |
|
RPC-prepped Overdrive Primary Clutch Only |
CALL |
|
RPC-prepped Secondary Clutch Unit |
CALL |
|
RPC Overdrive Sheaves |
$175.00 |
|
POLAR Clutch Set (incls. Primary, Secondary, Belt) |
$642.00 |
|
POLAR Primary Only |
$475.00 |
|
POLAR Seconday Only |
$290.00 |
|
POLAR "Max" Belt (33188) |
$29.95 |
|
POLAR 10" Belt (35375) |
$29.95 |
|
RPC Hardened, Tool Steel Ramps (12, 15, & 18-22, Special
4 stage, & MORE!) |
$61.95 |
|
RPC Rollers (features non-seize insert) |
$47.50 |
|
POLAR Rollers (plastic inner) |
$27.00 |
|
RPC Arms (billet aluminum w/ hard-anodized finish) |
$47.50 |
|
POLAR Arms |
$47.50 |
|
RPC Billet Clutch Face (8 patterns) |
$54.95 |
|
Weight Kit (4 thru 9 gr.) |
$49.00 |
|
POLAR Helix (34, 38, 42°) |
$54.95 |
|
POLAR Primary Spring (Black, Orange, Purple, Green,
Black/Yellow) |
$19.95 |
|
POLAR Secondary Spring (Yellow, Red) |
$19.95 |
|
RPC Lightened Hub Assembly (Spider) |
$68.50 |
|
POLAR or CC Drive Hub |
$43.50 |
|
POLAR or CC Primary Post |
$82.50 |
|
5/16" X 4 1/2" Grade 8 Fine Thread Clutch Bolt |
$1.50 |
|
RPC Bronze Bushing |
$11.50 |
|
RPC Grade 8 Aircraft Bolt/Nuts Set (incls. 6 ea.) |
$7.50 |
|
RPC non-seizing crankshaft bushing |
$4.50 |
|
RPC Ramp Holder (clutch can) |
$59.45 |
|
CC Spring Retainer |
$19.50 |
|
RPC Secondary Steel Tower Pins |
$36.00 |
|
RPC CC Heavy Duty Secondary Moveable Sheave |
$73.00 |
|
RPC Secondary Buttons (ea., 3 needed) |
$3.00 |
|
RPC Aluminum Belt Guard |
$94.95 |
|
RPC Triple Clamp Motor Plate |
$199.95 |
|
RPC Double Bearing Crankshaft Support Assembly |
$139.95 |
|
RPC 3/8" thick clutch-side crank support upright |
$15.00 |
|
RPC Adjustable Jackshaft Stiffener (incls. Crank support
upright) |
$125.00 |
|
|
|
|
|
FUEL SYSTEM COMPONENTS |
|
|
Walbro Fuel Pump |
$26.00 |
|
Walbro Fuel Pump Rebuild Kit |
$15.50 |
|
Walbro Fuel Pump Mount (bolts to head) |
$13.00 |
|
Mikuni Fuel Pump |
$31.50 |
|
Mikuni Fuel Pump Rebuild Kit |
$9.95 |
|
1/4" Inline Fuel Filter |
$3.00 |
|
1/4" Fuel Line per foot (Red, Blue, Purple, Clear,
Fluorescent Orange) |
$0.60 |
|
Power Stack Air Filter |
$29.95 |
|
Oversized Straight Air Filter |
$13.00 |
|
92" Throttle Cable with Housing (fits 28, 33, 40,
42-28mm Mikuni |
$7.95 |
|
RPC Auluminum Fuel Tank |
$99.95 |
|
JAZ Fuel Tank |
$39.95 |
|
RPC Fuel Log (dual inlet, single outlet) |
$35.00 |
|
33mm Billet Carb Top w/Retainer Flange |
Call |
|
40mm Billet Carb Top w/Retainer Flange |
Call |
|
42-28mm Carb Top w/Retainer Flange |
$49.95 |
|
MAXJET Board with jet assortment (fits Holley jet
conversion) |
$95.00 |
